3 Methods to Reset BMW E90 Battery with INPA

I have been interpreting the text in E90 clubs in Japan.



The battery reset is said to be in the inpa ... (There are 3 different methods of vehicle,

Battery (IBS) reset can be done with BMW INPA K+DCAN cable.




1. First Method

1 Select your car model

2 Select your engine type (MS or MSV in front of the engine type)

3 Select Status (F5)

4 Select PM-IBS (F5)

5 Click B Exchange (F5)

6 Popup (OK) should appear if job is done.




2. The second method

Step 1: select BODY from the left hand pop-up menu

Step 2: select POWER MODULE in the right hand list

Step 3: select ACTIVATE from the next menu

Step 4: Select ACTIVATE2 from the next menu

Step 5: Then select F7 - Register battery replacement. Almost instantly you get the message: "Register battery replacement Activated properly."




3. The third method

In that case you open up Toolset 32 ​​(under EDIABAS folder):

1. Open MSD80.prg

2. Look up steuern_batterietausch_registri. (near bottom of job list)

3. Go to Jobs menu

4. Select Run Job




Use ncs expert to change the ampere to 70ah -> 90ah in the CAS module.

Battery reset is available only in INPA.

After clicking STATUS button, click PM-IBS second state B, and press amperage and battery old

You can see the current charge.

Press B change to change the battery and press reset to reset the IBS intelligent battery system.

If you look at status B, the old status is changed to 0 and the battery run is reset.




I have not tried it yet ... You can try it yourself. 

www.obdii365.com