GODIAG BMW vs. BMW ICOM A2 Next-OBD365.com

GODIAG V600-BM CAN-FD J2534 is a BMW professional diagnostic & programming / coding tool, it will replace GT1, OPS, OPPS, ICOM, ICOM A2, ICOM A3, ICOM NEXT.

V600-BM CAN-FD J2534 is able to access to all systems of new BMW car models to perform these functions: quickly read / clear fault codes, read dynamic data stream, active test, activation, components replacement, ECU replacement and upgrading, personalized settings, ECU programming, retrofitting and upgrading car configuration, SCN Coding, transmission initialization, enable the hidden features etc.

Look at this comparison table Godiag V600 Vs. BMW ICOM A2 / A3 / Next:

Items		Godiag V600 BMW	ICOM A1 A2 A3 NEXT
Image
Configuration	Volume	12cm6cm2cm	25cm12cm4.5cm
	Weight	300g	1.5kg
	CPU high-speed processing	High-speed processing 580 MHz MIPS, 32MBFLASH, 128MByte RA,built-in 32G	Average processing MPC5200 400MHZ
	Low power consumption	3.6W	15w
Communication	Wifi	Built-in 150Mbps Wi-Fi 1T1R 802.11bgn	Optional (or NO optional)
	Point to point wifi	Yes	No
	Connect wifi through router	Yes	With Wifi card
	Network cable communication	Yes	Yes
	USB	Yes	No
Protocol	CAN-FD	Yes	No
Protocol	DOIP	Yes	Yes
Functions	BMW model diagnosis	Yes	Yes
	ISTA-D (Diagnostic Software)	Yes	Yes
	ISTA-P (Programming software)	Yes	Yes
	ECU Programming	Yes	Yes
	Coding	Yes	Yes
	ECU Data Update	Yes	Yes
	Optical fiber interface	Yes	Yes
	Refit	Yes	Yes
	For new BMW models, there is no need to turn on the ignition switch and smart key, and V600 can also enter the diagnostic mode	Yes	Yes
Features	Add authorization to support more models	Yes	No
	Authorization of JLR CAN FD	Yes (Extra charge)	No
	Authorization of ODIS	Yes (Extra charge)	No
	Authorization of Toyota TIS	Yes (Extra charge)	No
	Authorization of Benz software	Yes (Extra charge)	No
Update Plan	Phone APP is under development	Yes	No
Update Plan	Charge your phone by using tapy-c cable to connect V600	Yes	No

Since Godiag V600 is claimed to replace BMW ICOM A2 / A3 / Next, what are its stand-out features? Let’s go on learning its details:

Firstly, look at Godiag V600 outlook, and this are its button description:

F1-Press it for more than 3s to reset factory setting

F2-Press it to restart system

Shell	The shell is made of Polyamide. Size:108 x 52 x 27 mm
Power Supply	7-32 V
Current Consumption	About 300 mA when the power is 12V
CPU	580 MHz MIPS, 32MBFLASH, 128MByte RA, built-in 32G TF card(optional)
Operating System	Linux
WiFi	150Mbps Wi-Fi 1T1R 802.11bgn
Bluetooth	Bluetooth5.0/5.1
Interface	USB 2.0 Ethernet 10/100Mbps


Indicator	DoIP indicator WIFI/BT indicator ETH indicator System indicator
Buzzer	Sound Pressure Level: MIN.80 dB
Temperature	Working：-20 … +55°C, Storage：-20 … +85°C
Protection Rating	Dust prevention and water resistance conform to IP52
Conform to Electromagnetic Compatibility	Noise emissions：EN 55011,EN 55022 Anti-interference：EN 61000-6-2, EN 61000-6-4

Godiag V600 supports professional diagnostic function for all BMW series:

1 series: 1’_E81/E81/E87/E88,1’_F20/F21

2 series: 2’_F22/F23,2’_F45/F46,2’_F87

3 series: 3’_E46,3’_E90/E91/E92/E93, 3’_F30/F31/F34/F35,3’_F80

4 series: 4’_F32/F33/F36,4’_F82/F83

5 series: 5’_E39,5’_E60/E61,5’_GT(F07), 5’_F10/F11/F18

6 series: 6’_E63/E64,6’_F06/F12/F13

7 series: 7’_E38,7’_E65/E66,7’_F01/F02/F03/F04, 7’_G11/G12

X series: X1_E84,X1_F48/F49,X3_E83,X5_E53,X5_70,X6_E71,

X6_E72,X3_F25,X5_F15/F85,X6_F16/F86,X4_F26

Z series: Z4_E85/E86,Z4_E89

I series: I’_I01/I02

MINI: MINI_R50/R52/R53, MINI_R55/R56/R57/R58/R59/R60, MINI_F55/F56

Compatible Protocol: J2534, CAN-FD, DOIP, D-CAN, ISO14230, ISO15765, IFH, K-line ******

Comes with ISTA-D, ISTA-P, Tool32, BMW Coding, ISPI, INPA, E-SYS, WINKFP, NCS-Expert Tool, and you can directly run them. no need to install any driver.

1) ISTA-D: used to read / erase fault codes, read the data flow, maintenance guidance, circuit diagram, wiring diagram and directly upgrade & program new models. It will activate the ignition switch without keys during diagnosis.