BMW ICOM ISTA-P 94201 63031 63014 Error Solution

If you has ISTA-P 94201 63031  63014 Error when running BMW ICOM software, here's the proper solution. 


This is the screen.

Maybe you've seen this error at least once you use ISTA-P

Most likely EDIABAS or PSDZ errors.

1. Exit ISTA-P first and exit the program.
2. Disconnect ICOM connected to OBD terminal of vehicle.
3. Remove the battery terminal of the vehicle for about 10 minutes.
4. Reconnect the vehicle battery terminal.
5. Turn on ignition of the vehicle.
6. Connect ICOM to OBD terminal of vehicle.
7. Run ISTA-P Loader to select ICOM.
8. Run the ISTA-P program.

If you do this, most of the work will be done.
(Assuming that EDIABAS and the rest of the programs are in place)

If the same error is repeated in other ICOMs as described above,

Most of them are EDIABAS, so try patch,

If you still have symptoms, you will need to reinstall ISTA-P BMW Diagnostics, Programming, etc.