How to Set up BMW ISTA-D with Openport 2.0 ?

1.How to setup BMW ISTA-D working with Openport 2.0?

1). Firstly you should have ISTA-D Programmer installed ,then run BMW Passthru drivers under Administrator
2). Choose Openport 2.0 as J2534 Device
3). Copy all fies EXCEPT EDIABAS.INI from C:\Program files(X86)\BMW AG|PassThruD to C:EDIABAS\BIN ,!!! DO NOT OVERWRITE EXISTING FILES !!!
4). Open the C:\EDIABAS\BIN\EDIABAS.INI file in notepad ,Edit configuration interface = STD:passthrud and Save it.
5). Run the BMW ISTA-D again and select menu Configuration—Interface,Select the EDIABAS.INI(You edited ones) and Apply it

Finished! Now you can test BMW Vehicles with Tactrix OPENPORT Interface through ISTA Programmer .it will not work on all models but newer models should work okay
You can download BMW ISTA-D Programmer Free from some garage forum or buy Hard disk from our store.
And here is the link for download BMW Passthru Drivers

Possible to work with ISTA+ and openport j2534?

Question: 

May i have a question if somebody test already tactrix Openport 2.0 J2534 interface to make it works with BMW ISTA/D (ISTA+)?

Solution:

Confirm it its works with ISTA/D, install bmw passthru drivers and set ediabas.ini to: STD:psssthruD

You can try this. You first need to get the pass thru drivers from bmw. Install the driver for YOUR pass thru and then follow below

1. Run BMW PassthruD in Administrator(Important!!!)

2. Choose the J2534 device you want and save it

3. COPY all file from  C:\Program files (x86)\BMW AG\PassThruD to C:\EDIABAS\BIN (default) EXCEPT EDIABAS.INI

4. Open EDIABAS.INI in notepad

5. Edit configuration interface = STD:passthrud  and save it!

6. Launch ISTA/D and move to Configuration -> Interface

7. Select EDIABAS.INI and apply it.

it will not work on all models but newer models should work okay. Have tested this and it works. I have a bmw icom now but last time I tried this it worked okay.

BMW passthru drives free download
https://mega.nz/folder/K1AiGYaL#BmwkreOciW_vuIa3wrPrYQ

read also: 

How to setup BMW ICOM Rheingold on INPA K+D CAN cable