BMW Dr.GINI B021 Version Software Free Download

We have discussed Dr.GINI B020 version software in detail in previous post. Here you can download newer B021 version for free.

Note: B021 is not the latest version,  latest B022 is not for free.  Latest BMW ICOM HDD also comes with free Dr.GINI engineering software.

Introduction:
The friend who made this is called Dr.GINI.
The advantage of this program is that can be used on both E-series and F-series.

Function:
The interface supports K+DCAN, ENET cable, Passthru, ICOM and ICOM next

The friend is great,but sometimes this tool is likely to be paid.

Free download Dr.GINI-B021 coding software
https://mega.nz/#!Hp1mAaZS!EtNhwaSwVtpYHoSAVjNakuYjqPFU-zPrrzrDv_9DrmY

File Including:

–AP132.DLL: Use if error occurs during installation
–ECU: Use in Expert menu
–EDIABAS: EDIABAS installation file
–INTERFACES: EDIABAS.INI file for each interface
–MAPS: Latest lookup.xml file for map updates
–setup Dr.GINI EN Basic.exe: B021 installation file based on B020

The difference between B020 and B021 is…
-Convenient to use ICOM in Interface

-Units menu to complement and add FSC, instrument panel, FRM functions

-Map update FSC code extraction

-Instrument cluster

Now let’s look at the Dr.Gini main features (use older version as example):
Delete Fault Code
Deleting fault code of module is very fast and quick
In the functional window, click 1.Identification 2.Read Errors at the bottom

Module in error is shown in red, click “Clear Errors” in the bottom right corner.

A list of error deleted. The time required is within a few seconds…
You don’t have to turn Rheignold to try to delete the fault code.

Gauge and actuators

VO: Shows the vehicle order of the vehicle. It also shows the i-level of the vehicle
on the right side.

Map update FSC code generation.

Generate fsc code to update CIC/NBT Map.

In Expert Mode, also VIN change, module reset

It seems that a small program is integrated with a clear function.

See also:

Dr.gini B020 BMW Manual: Download, Install, How to use

http://blog.obdii365.com/2018/03/30/free-download-bmw-dr-gini-b021-coding-software/

Set up DHCP server on external router for BMW ICOM ECU flash

I made a definitive guide of how to set up DHCP server on an external router for BMW ECU flashing with BMW ICOM diagnostic tool.

Why is this necessary?

When flashing specific modules (KOMBI, NBT,..) on F and G series, the

ICOM switches between different IP addresses and therefore loses sync with the computer. In order to resolve this issue, there needs to be a DHCP server between the ICOM and PC, which redirects any traffic on the selected MAC address (in this case the ICOM’s MAC address) to a specified IP address.

All three connected devices (PC, ROUTER and ICOM incl. icom a1, icom a2, icom next) need to be set to DHCP.

In this tutorial, I used an old D-Link DIR-300 router. You can use any router that supports setting its’ netmask to 255.255.0.0 and has the capability for DHCP server.

Step-by-step instructions:

Before this, you need to turn off your Windows Firewall !

Step 1: Configure your PC to DHCP

Go to Control Panel > Network Connections > Ethernet>Properties

Select: Internet Protocol Version 4 (TCP/IPv4) and click Properties.

Both tabs need to be as follows:

When you now connect something with LAN cable, your Ethernet card under Control Panel > Network Connections > Ethernet>Details should now show DHCP Enabled Yes.

Step 2: Configure your ICOM to DHCP

Connect your ICOM to the car’s OBD2 port, wait for it to power on and connect it to your PC via LAN cable. Wait a minute or two to be recognized by the PC.

In iToolRadar or Dr. Gini take a look at your ICOM’s assigned IP address. Copy it into your web browser (I use Google Chrome) and at the end add :60080 (this is the port fort the settings).

Example: http://169.254.97.140:60080/

You will then be asked for a Login username and password.

Username: root Password: NZY11502

Under LAN settings make sure your ICOM is set to DHCP. Make a note of the ICOM’s subnet mask.

Step 3: Configure your router for DHCP server.

Disconnect ICOM, power up your router and connect it to your PC via LAN cable. Use the router’s LAN ports.

Open Command Prompt (CMD) and type in ipconfig.

You will see a list of your Connection Cards configurations. Under LAN you will see your router’s IP addresses. Copy the Default gateway IP address into your internet browser. This time you do not add any port number at the end. P.S.: If there is no Default gateway listed, make a hard reset of your router with its’ physical reset button.

Type in the username and password of your router. The default username is usually admin and the password is either nothing/blank or also admin.

Now go under advanced and turn off your router’s firewall. In my case it is under ADVANCED>Firewall&DMZ. Disable SPI, save settings.

Then go to LAN settings and assign 192.168.0.1 with subnet mask

255.255.0.0 to your router.

Important: The subnet mask of the router needs to match ICOM’s subnet mask. Enable DHCP server.

Set the pool to be between 100 and 199.

Save settings and reboot your router.

The DHCP Client list should now be populated with your PC’s address. If not, physically power off and on your router (maybe also PC), then check again.

Settings should look like this:

And your PC listed under DHCP client List.

Step 4: Connect everything together

Power off your router, disconnect it from your PC, disconnect your ICOM from the car and LAN. No device should be connected via LAN to anything at this point and both router as well as ICOM should be powered off.

Follow this exact order:

 Power on your router. Wait 2 min for it to fully boot up.

 Connect ICOM to the car’s OBD2 port and wait for it to fully boot up.  Connect ICOM to the router via LAN cable. Use the LAN ports on the router (port number does not matter). Wait a minute or two.

 Connect your PC to the router via LAN cable. Use the LAN ports on the router (port number does not matter). Wait for the PC to recognize the router.

 In web browser connect to your router’s settings menu as described in step 3. Take a look at the DHCP Client list under LAN settings. Your ICOM and PC should be listed.

 Open iToolRadar or Dr. Gini and you should see your ICOM listed with an IP address of 192.168.0.x, where x is a number between 100 and 199.

This is it. You can now open ISTA/D and run a vehicle test with your BMW ICOM. If ISTA/D recognizes your vehicle fully, you are all set. If not, there is a problem and you should not attempt to flash anything.

Good reference may help you out:

How to setup router for Programming KOMBI and NBT

Router DHCP, Icom DHCP and Windows Ethernet: automatic dhcp

First of all the ICOM should be configured this way:

ICOM Config

ConnectionMode = STATIC_IP
Ip = 192.168.68.85
Netmask = 255.255.255.0
Gateway = 192.168.68.99

DHCPSRV.INI

[SETTINGS]
IPPOOL_1=192.168.68.1-254
IPBIND_1=192.168.68.99
AssociateBindsToPools=1
Trace=1
DeleteOnRelease=0
ExpiredLeaseTimeout=3600

[GENERAL]
LEASETIME=86400
NODETYPE=8
SUBNETMASK=255.255.255.0
NEXTSERVER=192.168.68.99
ROUTER_0=192.168.68.1

[DNS-SETTINGS]
EnableDNS=0

[TFTP-SETTINGS]
EnableTFTP=0
ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot
WritePermission=0

[HTTP-SETTINGS]
EnableHTTP=0
ROOT=C:\Users\Osx\Desktop\DHCP\wwwroot
[00-01-A9-00-EE-E9]
IPADDR=192.168.68.1
AutoConfig=06/26/2016 12:41:32
Hostname=ICOM1120134
LeaseEnd=1467070189

Windows Ethernet config:

“Use the following IP Address”
IP 192.168.68.99
Subnet mask 255.255.255.0

Hope this help.

http://blog.obdii365.com/2017/09/04/set-up-dhcp-server-on-external-router-for-bmw-icom/

BMW Dr.gini B020 Engineering Software User Manual

Dr.gini B020 BMW diagnostic software is a new program released as BMW ICOM software and tested OK to work perfect with a communication interface (BMW ICOM, BMW ICOM Next, BMW ENET cable, PASSTHRU or INPA K+DCAN cable).

Dr gini BMW download FREE: Unknown security

https://mega.co.nz/#F!VwJzgByC!K0krmp2Rfy86NetmhCIx6A

or

https://mega.co.nz/#F!Fl5WBR5D!Svh3FVE4A3FQboexaVPtFA

Dr gini BMW download: Tested OK

http://www.obdii365.com/wholesale/v2017-7-bmw-icom-software.html

 

How to install Dr.gini – b020:

Step 1: install EDIABAS.

Run the EDIABAS _7.3.0.msi in the EDIABAS folder to install the EDIABAS

Do not change any setting during installation.

Step 2: install Dr.Gini

Unpack the “Setup Dr.Gini B014 EN.zip” to run and install

Note: the setup is not completed

Step 3: files replacements in EDIABAS

Copy extracted files in the ECU folder to the ECU folder where EDIABAS program is installed

Step 4: Copy the EDIABAS.INI in”INTERFACES/ENET Ediabas.INI and overwrite the C:/EDIABAS/BIN folder, as Dr.Gini will be connected by the ENET cable.

Copy the api32.dll file in the “API32.DLL” folder to:

For Windows 7/8/8.1 / 10 64-bit:

C:/Windows/SysWOW64

For Windows 7/8/8.1 / 10 32-bit :

C:/Windows/System32

Step 5: Copy the Gini_B020.exe file to C:/EDIABAS/BIN.

Sometimes, Gini_B020.exe is recognized as a malicious program and may be removed from an anti-virus program. If you feel that this process is unstable, you can just delete this file.

Dr.gini – b020 installation completes.!

How to use Dr gini BMW:

Dr.Gini – Interface Configurator (ICOM, ENET, K+DCAN, PASSTHRU)
Discover & manage up to 3x ICOM interfaces

Dr.Gini – Register a Battery (E series) – Expert

Dr.Gini – How fast you can read and display the engine analog values:

Petrol Engine: 21 gauges updated each 9ms approx.

Diesel Engine: 22 gauges updated each 8ms approx.

If your gauges are slow, it’s probably because of your communication interface

Dr.Gini – Reset Driver Side Window – Expert

Ecu: D_KBM
Job: STEUERN_FENSTERHEBER_DENORMIEREN
Argument: 11
–> Run Job

Attention:
the driver’s window will open and close itself !

Ecu: D_KBM
Job: STEUERN_FENSTERHEBER_EINLERNEN
Argument: 11
–> Run Job

25th December 2016… Save the date…

Dr.Gini B021 – What’s new in Basic version?

1. FSC read and write for E series
   –> enter Ecu Address, then press Status to get started
2. Maps Code generator
   –> drag and drop FSC in the Textbox to get started
3.  Dashboard controls
4.  Footwell Module Reset counter

http://blog.obdii365.com/2017/08/01/dr-gini-b020-bmw-manual/